Writing "FileName" and "Directory" tags

By writing the FileName and/or Directory tags, ExifTool can be used to rename and/or move images into directories according to any information contained in the image. This is a powerful feature when combined with the -tagsFromFile ability to copy the values from other tags. The most common use of this feature is to organize images by date/time, but any other tag value may also be used.

Writing the Directory tag moves a file to a specified directory. The directory is created if it doesn't already exist.

Writing the FileName tag renames a file. If the new FileName has a directory specification (ie. contains a '/' character), then the file is also moved to the specified directory (see example 6 below). Existing files will not be overwritten (but see "Warning" below).

The write-only TestName tag provides a mechanism for dry-run testing of the rename feature. Writing TestName displays the old and new names without making any changes to the files. (Note that there is no corresponding test tag for Directory, but TestName supports a full path name just like FileName, so the directory may be tested as well.)

The %d, %f, %e file name format codes may be used to represent the directory, name and extension of the original file when specifying FileName and Directory tags via the command-line interface. (In a similar way to the -o, -w and -tagsFromFile options.) Also, %c may be used to add a copy number to the output file name to avoid collisions with existing file names. Note that these codes must be escaped with an extra % if used within a date format string. Modifiers may also be used to change the default behaviour of these format codes. See the -w option in the application documentation for details.

When organizing files by date/time, use of the -d (date format) option is essential to specify a format for the filename (and/or directory name). The examples below demonstrate the use of this feature. Also, a list of of common date format codes is provided for reference.

Advanced feature: The write-only HardLink tag may be written using a technique similar to FileName. Instead of renaming or moving the file, writing HardLink creates a hard link with the specified name. This feature allows files to be organized without affecting the originals. See the Extra Tags documentation for more information.

Notes:

Writing the FileName and/or Directory tags alone causes the file to be renamed or moved, not copied. However, if any "real" tags are written at the same time, then the file is rewritten to the new destination and the original file is left unchanged. (Only the four writable "pseudo" tags, FileName, Directory, FileModifyDate and FileCreateDate, may be set without causing the file to be rewritten.) If desired, the -overwrite_original option may be used to remove the original copy when the file is rewritten.

Conversely, the -o option may be used to force exiftool to always create a copy of the file, even if no meta-information tags are written. This is true even if the -o option is superseded by writing the Directory tag, or through a FileName which includes a directory specification. (See example 5 below. Also see example 11 for the directory precedence rules.)

If the -d option is used, the unformatted date/time value must be valid (ie. in the form "YYYY:mm:dd HH:MM:SS"), otherwise the date formatting will fail and the file will not be renamed or moved.

In a Windows batch file, all % characters must be escaped as %%. This can result in extreme format codes like %%%%f when using the -d option.

Warning: Writing illegal file names in Windows can have unpredictable results and may result in data loss. Illegal characters in Windows file names are:
    / \ ? * : | " < >
Any tag used in generating a file name which may contain these characters must first be filtered to remove or translate these characters. A special feature allows these characters to be removed from a tag value by adding a semicolon inside the braces after a tag name. For example:
    exiftool "-filename<${model;}.%e" c:\images
This advanced formatting feature may also be used to do arbitrary reformatting of any tag value used in a format string. See the -p option in the application documentation for more details.

Examples

 0. exiftool -d %Y%m%d_%H%M%%-c.%%e "-testname<CreateDate" DIR
The TestName tag is used for dry-run testing of the file renaming feature. The above command is identical to that of the next example except that TestName is written instead of FileName. So instead of renaming the files, this command prints the old and new file names without actually changing anything. For example:
> exiftool -d %Y%m%d_%H%M%%-c.%%e "-testname<CreateDate" tmp
'tmp/a.jpg' --> 'tmp/20031031_1544.jpg'
'tmp/b.jpg' --> 'tmp/20010519_1836.jpg'
    1 directories scanned
    0 image files updated
    2 image files unchanged
 1. exiftool -d %Y%m%d_%H%M%%-c.%%e "-filename<CreateDate" DIR
Rename all images in directory 'DIR' to names like '20060327_1058-2.jpg', with individual file names derived from the value of the CreateDate (plus a copy number with a leading '-' if a file with the same name already exists), and with the same extension as the original image. [Note that copying tag values with '<' implies '-tagsfromfile @' unless otherwise specified. See the -tagsFromFile description in the application documentation for details.]

FAQ: "Why doesn't this command rename my files?"

There are 2 common reasons for this:

a) When a directory name is specified, this command will only rename "writable" files in the directory. Use 'exiftool -listwf' to list the extensions of currently writable file types. The -ext option may be used to rename other file types (eg. '-ext avi').

b) For this command to work, the CreateDate tag must exist in the source file. Use 'exiftool -createdate FILE' to see if a file contains this information. If it doesn't, you may need to use another date/time tag such as DateTimeOriginal or FileModifyDate. To see all available date/time tags in a file (and their locations), use 'exiftool -a -G1 -s -time:all FILE'.

 2. exiftool -d %Y-%m-%d "-directory<datetimeoriginal" image.jpg
Move 'image.jpg' into a directory with a name given by DateTimeOriginal, in the form '2006-03-27'.
 3. exiftool '-filename<%f_$imagesize.%e' dir
This example uses an expression to add the image size to the name of all images in directory 'dir'. For example, this would remame a 640x480 image called 'image.jpg' to 'image_640x480.jpg'. (Note that the single quotes are necessary in Unix shells due to the '$' symbol, but double quotes must be used instead when running in a Windows cmd shell.)
 4. exiftool -r -directory=%e_images/%d pics
Recursively move all images based in directory 'pics' to separate directory trees organized by file extension. For instance, in this example the file 'pics/toys/new_car.jpg' is moved to 'jpg_images/pics/toys/new_car.jpg'.
 5. exiftool -r -o %e_images/%d pics
exiftool -r -o dummy/ -directory=%e_images/%d pics
Both of these commands have the same effect as example 3 above except that images are copied instead of moved since the -o option was used. In the second command the trailing '/' on 'dummy/' is necessary because otherwise 'dummy' would be interpreted as a file name. This technique of using -o with a dummy directory name is necessary when the directory name is derived from the value of other tags (eg. '-directory<createDate') and you want the files to be copied instead of moved. (Because the values of other tags may not be used with the -o option.)
 6. exiftool -r -d %Y/%m/%d/image_%H%M%S.%%e "-filename<filemodifydate" DIR
Recusively rename all images in 'DIR' and any contained subdirectories to the form 'image_HHMMSS.EXT' (where 'ext' is the original file extension), and move them into a new directory hierarchy based on date of file modification, with path names like '2006/03/27/image_105859.jpg'.

The following examples demonstrate the interaction of this feature with other ExifTool options:

 7. exiftool -filename=new.jpg dir/image.jpg
Rename 'dir/image.jpg' to 'dir/new.jpg'.
 8. exiftool -filename=new.jpg -comment=xxx dir/image.jpg
Copy 'dir/image.jpg', add a new comment, and write output to 'dir/new.jpg'. The original file 'dir/image.jpg' is not changed.
 9. exiftool -filename=new.jpg -comment=xxx -overwrite_original dir/image.jpg
Rewrite 'dir/image.jpg', adding a new comment and writing output to 'dir/new.jpg'. The original file 'dir/image.jpg' is removed.
10. exiftool -o tmp/ -filename=new.jpg image.jpg
exiftool -o tmp/xxx.jpg -filename=new.jpg image.jpg
exiftool -o tmp/new.jpg image.jpg
A file name or directory specified via the FileName or Directory tag takes precedence over that specified by the -o option, so these three commands all have the same effect: 'tmp/new.jpg' is created without changing 'image.jpg'. Note that in the first command, the trailing '/' on 'tmp/' is necessary if the 'tmp' directory doesn't already exist, otherwise 'tmp' would be taken as a file name and 'new.jpg' would be created in the current directory. As illustrated in example 4 above, the file is rewritten instead of simply being renamed when the '-o' option is used.
11. exiftool -directory=dir1 -filename=dir2/out.jpg -o dir3/ dir4/image.jpg
This example demonstrates the priorities of directory names specified using different techniques. The output directory is taken from the first directory specified from the following list: 1) the Directory tag, 2) the directory part of the FileName tag, 3) the directory part of the -o option, or 4) the source directory, in that order. The order of the arguments on the command line is not significant. In this example, the target file is copied (not moved, because the -o option was used) to 'dir1/image.jpg'.
Note that both the FileName tag and the -o option may be used without a directory specification, in which case the directory with the next highest priority is used. Also note that if -o specifies a directory, then the directory name must end with a '/' or the directory must already exist, otherwise ExifTool will interpret the last part as a file name. (eg. '-o images/test' specifies the 'images' directory unless the 'images/test' directory already exists, while '-o images/test/' unabiguously specifies the 'images/test' directory.)
12. exiftool -d %Y/%m "-directory<filemodifydate" "-directory<createdate" "-directory<datetimeoriginal" .
Move image files from the current directory (.) into a directory hierarcy based on year/month. In this command the Directory tag is set from multiple other date/time tags. ExifTool evaluates the command-line arguments left to right, and latter assignments to the same tag override earlier ones, so the Directory for each image is ultimately set by the rightmost copy argument that is valid for that image. Specifically, Directory is set from DateTimeOriginal if it exists, otherwise CreateDate if it exists, and finally FileModifyDate (which always exists) is used as a fallback.

Common Date Format Codes

Date format codes are used in the argument to the -d option to represent components of the date/time string. The codes listed below are common to most systems, but additional codes may be available on your specific system -- see your strftime man page for details.

%a- abbreviated locale weekday name
%A- full locale weekday name
%b- abbreviated locale month name
%B- full locale month name
%c- preferred locale date/time representation
%d- day of month (01-31)
%H- hour on a 24-hour clock (00-23)
%I- hour on a 12-hour clock (01-12)
%j- day of year (001-366)
%m- month number (01-12)
%M- minute (00-59)
%p- 'AM' or 'PM'
%s- number of seconds since the Epoch, UTC (see note 1 below)
%S- seconds (00-59)
%w- weekday number (0-6)
%W- week number of the year (00-53)
%x- preferred locale date representation
%X- preferred locale time representation
%y- 2-digit year (00-99)
%Y- 4-digit year (eg. 2006)
%z- time zone in the form +/-hhmm (see note 1 below)
%Z- system time zone name (see note 2 below)
%%- a literal '%' character

ExifTool file name format codes may be used inside a date format string when a date/time tag is used to set the value of the FileName or Directory tags via the command-line interface. In this case, an extra '%' must be added to pass the format code through the date/time parser:

%%d- original file directory (including trailing "/" if necessary)
%%f- original file name (without the extension)
%%e- original file extension (not including the ".")
%%c- copy number (output files only)

See the -w option in the exiftool application documentation for details about special features available with these name format codes.

Notes:

  1. The %s and %z format codes use the time zone specified by the date/time value. If the date/time value does not include a time zone specification, then it is interpreted as a local time in the system time zone. These format codes are parsed by ExifTool, so they should work on all systems.

  2. The %Z format code ignores any time zone specified in the date/time value, and returns the system time-zone name for the given date/time interpreted as a local system time.

<-- Back to ExifTool home page